- Sunshine Star Industrial Pte Ltd.
- Oil seals - double lips Single row cylindrical roller bearings SKF bearings Singapore
English
العربية
Deutsch
Ελληνικά
Español
Français
Bahasa Indonesia
Italiano
Português
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
Home> Company News> Bearings used in wind turbines
- AddressLeader Industrial Park
- Factory Address38 Wang Chiu Rd Kowloon Bay Hongkong
- Worktime9:00-18:00
- Phone(Working Time)00852 6851 5717
- Fax00852 6851 5718
Bearings used in wind turbines
NOVEMBER 02, 2022
The windmill blades are rotated by the wind, and the generated force is transmitted to the generator, which generates electricity called "wind power generation."
The use of natural wind to generate electricity, this power generation method has less impact on the environment, is being paid more and more attention!
The force of rotation of the blade is transmitted to the main shaft, and in order to generate more electric power, the rotation speed of the shaft must be accelerated, which is achieved by the speed increaser. In addition, bearings are used in very important components such as generators.
In a wind power generation device, a large device has a height of more than 100 meters, and if it is compared with a tall building, there are about 20 layers. The bearings used in wind power installations are also very large, with diameters exceeding 2 meters and weights exceeding 2 tons.
The blades and generators are mounted on very tall columns for better access to the wind. At the same time, however, inspection and replacement of blades and generators has become difficult. Therefore, the parts installed on the windmill must be durable and not prone to failure.
Sunny days, rainy days, summers, and winters. In order to protect the environment of the earth, the bearings continue to rotate like this every day.
Rexroth A1VO35DRS0C200/10LB2S4A2S2
Rexroth A1VO35DRS0C200/10RB2S5A2S2
SCY14-1B axial plunger pump supply
Daikin Piston Pump V15A1RX-95 supply